You’re excited to finally get rid of those dirty, bent, tacky blinds from 1988. Put down the pry bar for a minute and read this article before you accidentally damage your wall or window frame. Removing mini blinds, roman blinds, and wooden blinds without damage can all be accomplished by taking your time and using the right tools.
Before starting the removal process, you will need a few tools: a screwdriver, pliers, joint compound, a small putty knife, a sponge, paint that matches the wall’s current color, a paint brush, and wall primer if you think you need it. The wall primer is optional.
Step 1: Raise up the blinds all the way before doing anything. This makes them easier to handle.
Step 2: Some products use a valance or cornice to cover the top rail and brackets. Next you will want to remove this valance. Be very gentle for this step. Grab the bottom of the valance and push it toward the direction of the window so that you create a slight gap between the top of the valance and the top of the clips. Very carefully push the valance in an upward and outward motion at an angle until it is not touching the clips anymore. Make sure to remove the valance gently or the clips will break off.
Step 3: On a door mounted blind the hold down brackets need to be removed. These brackets are the ones that attach the bottom part of the blinds against the wall. Sometimes the end cap portion of the bottom rail has hold-down pins. If this is the case, remove the hold down pins before removing the hold down brackets. Next, use your screwdriver to unscrew the hold down bracket screws. For extra tight pins and screws, remove them with a set of pliers and use a power screwdriver instead of manual screwdriver.
Step 4: On wood, faux wood, and other horizontal blinds, you will unlatch the mounting brackets from the front and slide the head rail out. If the blinds are heavy or bulky, you may need help with this step. Wooden blinds tend to be heavier. Roman shades and cellular shades brackets are often times spring loaded or require a or tab is loosened behind the shade. You may need to refer to the product installation instructions to determine which type of bracket your blind uses.
Step 5: Remove the side and center mounting brackets with a screwdriver. If there are wall anchors, you may have to remove them with needle nosed pliers.
Step 6: The screws probably left small holes in the wall. Get out your joint compound and patch the holes using your putty knife. While it’s still wet, smooth out the joint compound with a sponge and let dry. Get paint that matches the current color on the wall and paint over the newly smooth area after the joint compound is completely dry. I like to save small glass food jars from pickles and salsa and stuff. I use them to store a little bit of paint for quick touch-ups like this.